UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM SD

SPECIALIZED DISCLOSURE REPORT

POLYCOM, INC.
(Exact name of registrant as specified in its charter)

 
					
State of Delaware	 	000-27978	 	94-3128324	
(State or Other Jurisdiction
of Incorporation)	 	(Commission File Number)	 	(IRS Employer
Identification No.)	

6001 America Center Drive
San Jose, California	 	95002	
(Address of principal executive offices)	 	(Zip Code)	
(408) 586-6000
Registrant’s telephone number, including area code
N/A
(Former name or former address, if changed since last report)

Check the appropriate box to indicate the rule pursuant to which this form is being filed, and provide the period to which the information in this form applies:
 
x	Rule 13p-1 under the Securities Exchange Act (17 CFR 240.13p-1) for the reporting period from January 1 to December 31, 2013.	

 

Section 1 – Conflict Minerals Disclosure
Item 1.01. Conflict Minerals Disclosure and Report.
A copy of the Polycom, Inc. Conflict Minerals Report is filed as Exhibit 1.02 and is incorporated by reference herein. A copy of this Form SD and Conflict Minerals Report, in accordance with Rule 12b-12 (17 CFR 240.12b-12), may be found publicly on our website at www.polycom.com under “Corporate Governance.”
Item 1.02. Exhibit.
A copy of the Conflict Minerals Report is filed as Exhibit 1.02 and is incorporated by reference herein.
Section 2 – Exhibits
Exhibit 1.02 Conflict Minerals Report as required by Items 1.01 and 1.02 of this Form.

SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

	 	POLYCOM, INC.	
		
By:	 	/s/ S AYED M. D ARWISH	
	 	 	
	 	Sayed M. Darwish	
	 	Chief Legal Officer, Executive Vice President of Corporate Development and Secretary	
Date: June 2, 2014

Exhibit 1.02
Conflict Minerals Report
as required by Items 1.01 and 1.02 of Form SD
This Conflict Minerals Report (this “Report”) for Polycom, Inc. (“Polycom” or “we”) covers the reporting period from January 1, 2013 to December 31, 2013, and is presented in accordance with Rule 13p-1 promulgated under the Securities Exchange Act of 1934, as amended (“Rule 13p-1”).
This Report and our Form SD can be found on our website at www.polycom.com under “Corporate Governance.”
Introduction
Rule 13p-1 was adopted by the Securities and Exchange Commission (“SEC”) to implement reporting and disclosure requirements related to “conflict minerals” as directed by the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010. Conflict minerals are defined by the SEC as columbite-tantalite (coltan), cassiterite, gold, wolframite, or their derivatives, which are limited to tantalum, tin, and tungsten. Rule 13p-1 and the related rules adopted by the SEC require companies subject to Rule 13p-1 to perform certain procedures to determine the source of conflict minerals that are deemed to be necessary to the functionality of the products such companies manufacture or contract to manufacture. Specifically, companies are required to determine whether the conflict minerals used in their products originated in the Democratic Republic of the Congo or an adjoining country (the “Covered Region”), and whether armed groups directly or indirectly benefit as a result, and to disclose information about the due diligence procedures the company performed.
We have adopted a Conflict Minerals Statement (the “Conflict Minerals Statement”) pursuant to which we (i) expect our vendors to source materials from socially-responsible suppliers, including valid conflict-free mines, (ii) will work closely with our vendors to determine the potential use of conflict minerals in our supply chain, and (iii) will request our vendors to conduct the necessary due diligence and provide us with proper verification of the source of the materials used in the products. A link to the Conflict Minerals Statement can be found at www.polycom.com under “Corporate Governance.”
Reasonable Country of Origin Inquiry
Polycom has determined that certain conflict minerals are necessary to the functionality or production of products that we manufactured or contracted to manufacture in 2013. Based on that determination, we conducted a reasonable country of origin inquiry (“RCOI”) for 2013 to determine whether any of those conflict minerals originated in the Covered Region, or are from recycled or scrap sources. Polycom is many steps removed from the mining of conflict minerals. We rely on our Tier 1 suppliers to provide information on the origin of the conflict minerals contained in components which are included in our products. Our RCOI was based on a survey of our direct suppliers of materials, parts, components or products containing necessary conflict minerals.
Design of Our Due Diligence Measures
For the calendar year 2013, we adopted a policy and methodology that followed Annex I of the Organisation for Economic Co-Operation and Development (“OECD”) Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High-Risk Areas (the “OECD Framework”). Below is a summary of the due diligence measures we undertook as they relate to the five steps of the OECD Framework:
Step 1 – Establish strong company management systems . We have adopted and communicated the Conflict Minerals Statement to vendors and the public. We structured a team of individuals from various areas within the organization to support the process of supply chain due diligence, including implementing a system of controls to aid in the transparency over the mineral supply chain. This also includes, but is not limited to, the chain of custody and/or traceability of identifying upstream actors in the supply chain. Also included in the Conflict Minerals Statement is a grievance mechanism that will help monitor vendor compliance.
Step 2 – Identify and assess risk in the supply chain . We held meetings with management from various departments to discuss the applicable definitions of “manufacturer” and “contract to manufacture.” Through this process, we identified products that contain conflict minerals and mapped them to their respective vendors. We evaluated our hardware products that contain conflict minerals, which were determined to have been sourced from nine vendors (“In-Scope Vendors”). The In-Scope Vendors were surveyed through the RCOI survey process using the Conflict Minerals Reporting Template (known as EICC GeSI Template) published by the Conflict-Free Sourcing Initiative (“CFSI”). Responses received were reviewed for completeness and risk rated for additional due diligence.
 
1

Step 3 – Design and implementation of a strategy to respond to identified risks . From the risks identified above, management designed and implemented a strategy to respond to such risks. This strategy included the development of standard operating procedures that we will utilize to identify and act on supply chain risks. These procedures could include, but are not limited to, performing testing and remediation procedures, conducting post-implementation reviews, and identifying and prioritizing opportunities for future improvement.
RCOI surveys from In-Scope Vendors were collected and reviewed for completeness, as well as risk rated and assigned a rating of High Risk or Low Risk. High Risk In-Scope Vendors were provided with the Conflict Minerals Statement, as well as a link to the OECD Framework.
Step 4 – Support independent third-party audit of supply chain due diligence at identified points in the supply chain . Polycom leveraged the publicly-available information related to due diligence conducted on smelters and refiners by the CFSI’s Conflict-Free Smelter Program (“CFSP”). The CFSP uses independent private sector auditors to audit the source, including mines of origin and chain of custody of the conflict minerals used by smelters and refiners that agree to participate in the CFSP.
Step 5 – Report on supply chain due diligence . We have compiled our results and filed this Report in accordance with Rule 13p-1. Further information is also available by reviewing the Conflict Minerals Statement.
Products
During this reporting period, we identified the categories of products on Attachment A that we manufactured or contracted to manufacture during 2013 containing necessary conflict minerals.
Results of Due Diligence for the 2013 Calendar Year
The due diligence process, as described above, allowed Polycom to identify in-scope products and the corresponding vendors. We received survey responses from all nine In-Scope Vendors, or 100% of the population of products surveyed. The responses indicated that approximately 78% of the In-Scope Vendors may supply products that contain one or more of the named conflict minerals.
Our efforts to determine the mine or location of origin of the necessary conflict minerals in our products with the greatest possible specificity consisted of a review of the responses collected from our In-Scope Vendor surveys. Below is a summary of the country of origin information collected as a result of our RCOI efforts.

Conflict Mineral	  	Countries of origin and other sources may include the following	
Tin	  	Belgium, Bolivia, Brazil, Canada, China, Germany, Hong Kong, Indonesia, Japan, Republic of Korea, Malaysia, Peru, Poland, Russian Federation, Taiwan, Thailand, and United States
 	
Tantalum	  	Austria, China, Germany, Japan, Kazakhstan, Republic of Korea, Russian Federation, South Africa, Switzerland, and United States
 	
Tungsten	  	Austria, China, Germany, Japan, Republic of Korea, Russian Federation, United States, and Vietnam
 	
Gold	  	Australia, Belgium, Brazil, Canada, Chile, China, Germany, Hong Kong, Indonesia, Italy, Japan, Kazakhstan, Republic of Korea, Kyrgyzstan, Malaysia, Mexico, Netherlands, Philippines, Russian Federation, Saudi Arabia, South Africa, Spain, Sweden, Switzerland, Taiwan, Turkey, United States, and Uzbekistan

2

Future Measures
The due diligence process discussed above is an ongoing process. As we continue to conduct due diligence on our products, we will continue to refine procedures to meet the goals and adhere to values set forth in the policy outlined above. We will also continue to provide training to our appropriate internal teams on conflict minerals and the process utilized.
Independent Private Sector Audit of this Report
This Conflict Minerals Report was not subject to an independent private sector audit, as such an audit was not required by paragraph (c)(1)(iv) of the instructions to Item 1.01 of Form SD.
 
3

Attachment A
List of Product Categories
The following product groups include items that were subject to the RCOI and due diligence processes discussed in the Report:
UC Group Systems . Includes immersive telepresence, group video and group voice systems, including, but not limited to the following hardware products:
Polycom ® RPX™
Polycom ® OTX ®
Polycom ® ATX™
Polycom ® Halo™
Polycom ® RealPresence ® Group (300, 500, 700) Series
Polycom ® HDX ® 6000, 7000, 8000 and 9000 Series
Polycom ® RealPresence ® Practitioner Cart ® 8000
Polycom ® EagleEye™ Director Camera
Polycom ® VisualBoard™ Technology
Polycom ® Touch Control Device
Polycom ® Quality Definition Experience™ (QDX ® ) 6000
Polycom ® SoundStation ® and VoiceStation ® Conference Phones
Solutions Purpose-Built for Microsoft Lync—Polycom ® CX3000, Polycom ® CX5100, Polycom ® CX8000 Series
UC Platform . Includes universal collaboration servers, virtualization management (distributed media optimization), resource management, recording and streaming, open API’s and remote access technologies that constitute the Polycom ® RealPresence ® Platform, including, but not limited to the following hardware products:
Polycom ® RealPresence ® Collaboration Servers RMX Series
Polycom ® RealPresence ® Capture Server
Polycom ® RealPresence ® Capture Station Pro
Polycom ® RealPresence ® Capture Station Portable Pro
Polycom ® RSS™ 4000 Recording and Streaming Server
UC Personal Devices . Includes desktop video devices and desktop voice products, including, but not limited to, the following hardware products:
Polycom ® VVX ® Business Media Phones
Polycom ® SoundPoint ® IP Desktop Phones
Polycom ® HDX ® 4000 and 4500 Series
Solutions Purpose-Built for Microsoft Lync - CX Series
 
4